The Brother Laser Printer paper jam error with no paper jammed can occur due to the usage of the wrong type of printing paper. Other causes of this paper jam error in Brother printers include incorrect loading of paper, damaged printer rollers, and not using the ink cartridge of good quality. The ways of fixing the Brother printer paper jam error are by trying to remove the jammed paper from the outside. You can also check for any pieces of the jammed paper that may still be stuck inside the printer. After going through this article, you will come to know about the causes of the Brother printer paper jam error. We have also tried listing all the probable methods to fix this error that you can execute without any help from our technical experts.
The paper jam error in Brother printers can cause internal damage to the device when you try to print with the jammed paper. The error may have been caused because of using an inferior-quality printing paper, and not loading the paper correctly.
Given below is a detailed explanation of all the causes of this error:
sage of the Wrong Type of Printing Paper: The Brother printer is generally configured for using a certain kind of printing paper. When you insert any other kind of printing paper in the Brother printer, the error may show up.
Using Low-quality Printing Paper: Another cause for this error may be the usage of the inferior quality of printer paper installed in the printer. This will also adversely affect the printing quality of your document.
Improper Installation of Printing Paper: There may be a possibility that you have folded the printing paper in the input tray. That is why paper jam error is persisting in your Brother printer.
Overloading the Input Tray with Paper: The rollers of your printer pick the printing paper from a fixed height for printing the document. There may be a chance that you have inserted the paper above that particular height. Hence, overloading the input tray with the paper can also be one of the reasons for the occurrence of this error.
Not Using Ink Cartridge of Good Quality: You may be using ink cartridges of poor quality that are causing the Brother printer paper jam error. It can also result in the poor printing quality of your documents. If you continue using such a low-quality ink cartridge, then it can lead to damages to your printer.
Printer Rollers may be Damaged: The rollers of your printer are a key component in the process of printing. The damage to the printer rollers maybe because of their long usage. This may result in the wear and tear of the printer and result in the paper jam in Brother Printers.
As you are now familiar with the causes of this error, let us talk about the methods to fix this error.
The fixes for the paper jam error in Brother printers are removing the paper that is jammed from outside the printer, removing the paper jammed in the toner cartridge, and ensuring that the paper is correctly installed in the input tray.
If you are looking for more detailed fixes for this error, then you can read about them below.
Fix 1:
The method to fix the paper jam error is to restart your printer. You need to turn off your printer and let it be idle for a few minutes. Then turn on your printer and print a test job to check whether the issue has been resolved.
You can go through the below-given steps to follow this fix.
After following the steps shown here, you can try to print a sample job just to make sure that everything is working fine and the error has been resolved. If the error still shows up, then you can try the next given fix.
Fix 2:
The paper sometimes gets stuck in the toner cartridge and drum unit. In this fix, we will tell you how to clear the toner cartridge from any jammed paper.
When your device is off and not heating, access its top cover. Closely look here to find any pieces of the jammer paper. Gently remove them, if found. Once removed, you can place the cover once again.
If you have correctly followed the above-written steps, then your issue must have been resolved by now. You can check it also by taking out a test print job.
Fix 3:
There may be chances that the printer has some bits of paper stuck in it. You can remove it by clearing the tabs on the left and right sides of the printer. Pull the fuser cover open. Then, remove the duplex tray out from the Brother printer and make sure you remove all the pieces of paper. Place back the duplex tray and other parts as well back into their respective places.
You can find the step-by-step instructions here:
Note: All the parts that you remove from the brother printer must be placed on a neat and dry surface. This is done to avoid causing further damage to these parts.
If the issue still arises you may check if the paper is properly configured in the paper tray by referring to the next fix.
Fix 4:
The Paper Jam Error in the Brother Printer may come up because of the wrong installation of paper into the paper tray. The paper installed in the paper tray must be of the same size and weight.
You can stack the paper correctly by following these instructions:
Note: When the paper is inserted according to the “Paper Length Guide”, the paper will not come in contact with the back end of the paper tray.
If the print job is of good quality and automatically ejects without jamming or multi-feeding, then the problem should be resolved.
As you have gone through the article, you came to know about the causes and methods to fix the Brother Laser Printer paper jam error. The causes for this error may include damaged paper rollers, using low-quality ink cartridges, overloading the paper in the input tray, and Connect Brother Printer to Wifi. You can easily eliminate this error by uniformly stacking the paper, removing bits and pieces of jammed paper that may be present in the input tray. We hope that all the fixes we provided here were able to eliminate this error on your device. Keep reading for more fixes and methods for Brother printers.