The HP Printer Error 49 is caused by the attempt made by performing an action which the software is not capable of. Or your printer may not be designed to handle the complex commands. Error 49 in the HP printer is a communication error that can be caused due to many reasons. It can be seen as due to invalid operations or commands were given to the printer. The error 49’s occurrence can carry an alphabet along with it also. This is a FutureSmart firmware communication error and the alphabets along with it are variable values. The 49 error is a temporary issue and may not require any permanent hardware or software replacement. It can be easily resolved by running the power cycle again on your HP Printer.
The HP Printer 49 service error can be termed as miscommunication between the server system and the printer which is receiving the commands from the user. The HP Printer Error 49 is mainly of two types that are Intermittent HP Printer 49 service error and Persistent HP Printer 49 service error.
The error comes up only once over some time when the printer is functioning correctly and then not functioning again.
It occurs repeatedly for one or more than one time even after solving the issue.
The 49 error is caused by network traffic or the concurrent timings of the jobs and commands were given to the printer. It may also be caused by a firmware glitch. Other reasons for this error are shown here:
You can fix the HP Printer error 49 by calibrating the printer, running the power cycle again, giving a test print, enabling the Auto recovery, etc. These fixes can be administered on your own. Listed below is a detailed explanation of all the fixes that are involved in resolving the error 49.
Fix 1:
The method to fix the service error 49 is to calibrate the printer. First, you need to cancel all the jobs that are in processing. Then try giving a test print from a different software application. If the error is still there then you need to change the “DIMMS” or “EIO” devices that are connected to the printer.
Below, you can read more about all the steps involved to fix this issue:
Note: After following the above-mentioned steps, if the error message is still showing up, then check all the cable connections that might be connected to the printer and the system as well. Replace the formatter and calibrate the printer.
Fix 2:
Another way to fix the error 49 in HP printers is by cleaning the registry of your computer. The registry is a large database that stores all the important settings and data of the computer. Sometimes when the registry stores too much data, it can cause a few errors, and error 49 might be one of them.
To ensure that the registry does not create any problem, you can download a registry cleaner. It will help in keeping the registry storage junk-free and it won’t take up much space also.
Fix 3:
Running the power cycle means turning off your printer and turning it on again. Follow the steps given here to run the power cycle:
This is the most effective fix in solving this error. If the 49 service error message still shows up then you can follow the below-given fix.
Fix 4:
The HP Printer Error 49 can also be resolved by enabling Auto Recovery. At first, you need to print an event logo from the printer to find out the frequency of the error 49. If the frequency comes out less than 1, then the error will not harm your printer.
In case the frequency comes out more than 1 per week, you have to make sure that Auto Recovery is enabled. You can enable Auto Recovery from the control panel or using the Embedded Web Server (EWS).
If you don’t know how to enable the Auto Recovery feature, then these step-by-step instructions will tell you how to do it.
Fix 5:
If the error code 49 still shows up then the cause of the error might be an older version of the firmware file. You can update the firmware file by downloading it from the website after finding whether the printer is running FutureSmart 3 or FutureSmart 4. Then you can save it to a USB drive and update the firmware by uploading it to your system.
Below listed are the step-by-step instructions through which you can update your firmware easily:
Note: After you have followed the above-given instructions, wait for the process to get completed. When the “Complete” message is displayed, the HP printer will automatically reboot. After the printer is restarted, you can also print a test page to ensure that the firmware is updated or not.
The error 49 on HP printers usually indicates improper communication between your machine and computer. After reading this article you found out the causes of the HP Printer error 49. These can be inclusive of invalid commands or operations given by the user, incompatible version of the firmware, disabled auto-recovery, etc. The fixes for this error include calibrating the printer, updating the firmware, cleaning the registry, and running the power cycle. Through all these fixes your error would have been resolved by now. We will advise you to remember everything you got to know here to troubleshoot this error in case it arises in the future. If you want to fix HP Printer In Error State. Then you can contact us via telephone or mail.