While you are working with an Epson printer, the printer may not print anything in case the ink in the toner cartridge is low. Even when there is some amount of ink left in your printer’s cartridges, it will still not allow you to print anything. If you have a new ink cartridge with you, then you can immediately replace it. The way through which you can bypass the cartridges includes placing the ink holder in its original position and shaking the cartridges after pulling them out from the printer. This will result in spreading the ink evenly on the cartridge. These are the two methods you can use to bypass ink cartridges on Epson printers.
Through this article, we will give you a deeper understanding of how to bypass replace the ink cartridges on an Epson printer. and also how you can continue to print even with low ink in the toner cartridge. We urge you to keep on reading this article further.
Why should I Bypass/Replace Ink Cartridge on My Epson Printer?
You can bypass the ink cartridge on Epson printers to continue printing even with the low ink in the cartridge. The printer can restrict you from printing any documents even when there is ink left in the cartridges. You may replace the old ink cartridge with a new one if you have it. If you are printing with colour ink cartridges, then the printer will allow you to print in black ink for some time. However, you may not be able to do this for a long time. In case you do not have the replacement cartridges, then there is a need to bypass the ink cartridge in order to keep printing.
How to Bypass Ink Cartridge on an Epson Printer?
You can bypass the ink cartridge on your Epson printer by closing the ink holder without removing the ink cartridge when there is no microchip in the device. Another way to bypass the low ink cartridge is to take out all the cartridges and shake them for some time. This will evenly spread the ink throughout the ink cartridges and you can continue using the same cartridge again.
Below written is a detailed explanation of the methods through which you can bypass the toner cartridges.
Fix 1:
Bypassing the Ink Cartridge
The way through which you can bypass the ink cartridge is by opening the lid. When the ink holder of the empty ink cartridge moves in its position, close it without removing the cartridge.
Below given are the steps involved in this method.
- Open the cover of the printer and press down the “Ink” button.
- When the ink holder is going back to its original position, open the lid of the empty cartridge and close it without removing or replacing the cartridge.
- Close the cover of the printer and start printing again.
The above-mentioned steps can help you in bypassing the ink cartridge. This particular method will work well with the model of the printer which does not have a microchip. The microchip will send an error message to the printer when it is low on ink. Hence, the printer will shut down and not allow you to print anything.
Fix 2:
Shaking the Ink Cartridges
In this method, you need to lift up the printer cover and wait for the carriage to stop moving. Then pull out all the cartridges from the printer and turn it off. Unplug the printer from the power source for safety purposes. Shake the cartridges that you have taken out to distribute the ink throughout the printer.
You can execute this process through the steps given here:
- Open the printer cover while the printer is still on.
- Wait till the carriage stops moving back and forth.
- Then press the tabs at the end of each cartridge to pull out the printing cartridges.
- Turn off your Epson device and wait for the printer to completely shut down.
- Remove the power cord from the power source.
- Wait for a few minutes to allow the printer’s memory to get reset.
- Shake the cartridges that you have taken out from the printer. This will allow the ink to spread evenly on the cartridge.
- Finally, install the cartridges back in the printer.
- Plugin the printer power cord to the main supply and turn on your device.
Fix 3:
Resetting the Cartridges
Carefully pull out all the cartridges from your printer and check for the copper contacts at the end of each cartridge. You may find a button to reset the cartridges at the center of the contacts. Use the end of a paper clip to press the Reset button. Once you are done resetting the cartridges, place them in their original position. Your printer will think of them as new cartridges and accept them. Now, you may continue printing with the old cartridges.
Note: It is not recommended to continue printing when your ink is expended. This may cause internal damage to the printer. Try immediately replacing the ink cartridges.
Conclusion
Here, you learned the different methods that you can use to bypass the ink cartridges on your Epson device. The need to bypass the ink cartridges arises when you want to continue printing even if the printer indicates low ink levels of the ink cartridges. The way through which you can do the same is by putting the ink holder back into its place without removing the old cartridges. You can also take out all the cartridges from the printer and shake them to spread the ink in the cartridge. Through all the three methods we have mentioned above, you know easily to Bypass Ink Cartridge on Epson printer and continue printing without replacing the cartridges with the new ones. We hope that you found this article worth reading. Here, you can also find here a detailed guide to fix Epson Printer Not Printing Black Issues.